Minimum roof pitch	40°	75°
Headlap (minimum)	65 mm	38 mm
Batten spacing at maximum gauge	100 mm	114 mm
Size of tile	265 x 165 mm	265 x 165 mm
Covering capacity	60.0 tiles per m²	53.0 tiles per m²
Cover width	165 mm	165 mm
Profile depth	13 mm	13 mm
Hanging length	245 mm	245 mm
Weight as laid	72.0 kg per m²	63.6 kg per m²
Weight per 1000	1.2 tonnes	1.2 tonnes
Weight per tile	1.2 kg	1.2 kg
Weight per pallet (including pallet/packaging)	0.6 tonnes	0.6 tonnes
Quantity per pallet	500	500
Battens per m²	10 m	8.7 m
Batten size - up to 450 mm rafter centres	38 x 25 mm	38 x 25 mm
Batten size - up to 600 mm rafter centres	38 x 25 mm	38 x 25 mm
Nail size/type for tiles	38 x 3.35 mm aluminium ring shank clout head	38 x 3.35 mm aluminium ring shank clout head

Note: Unless otherwise stated, data is based on tiles laid at minimum headlap.

For projects where the rafters are below the minimum recommended roof pitch, please contact Technical Services for advice.

Tile Fixing

Sandtoft roof tiles must be laid and fixed to comply with BS 5534: the British Standard Code of practice for slating and tiling, and BS 8000: Part 6: the British Standard Code of practice for workmanship on building sites.

To ensure compliance with these Standards we strongly recommend that either the recommendations given in the Sandtoft Zonal Method User’s Guide and Zonal tables must be followed where available or a calculated fixing specification must be obtained using Sandtoft’s Fixing SPEC service.

For further information go to Fixing SPEC or call Sandtoft Technical Services on 0844 9395 999.

Back to Previous Page